[an error occurred while processing this directive][an error occurred while processing this directive]

Compressed Real-Time Transport Protocol Operational Mode Commands

Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot Compressed Real-Time Transport Protocol (CRTP) services. Commands are listed in alphabetical order.

Table 1: CRTP Operational Mode Commands

Task

Command

Clear CRTP flows statistics.

clear services crtp statistics

Display CRTP output.

show services crtp

Display CRTP flows.

show services crtp flows

Note: CRTP is supported on the following interfaces:

  • M Series and T Series routers—Link services intelligent queuing (IQ) (lsq-fpc/pic/port)
  • J Series router—Link services (ls-pim/0/port)

Note: For information about how to configure CRTP services, see the JUNOS Services Interfaces Configuration Guide.


Published: 2010-04-28

[an error occurred while processing this directive]