Technical Documentation

Channelized T1 and T3 Interface Operational Mode Commands

Table 1 summarizes the command-line interface (CLI) commands that you can use to monitor and troubleshoot channelized T1 and T3 interfaces. Commands are listed in alphabetical order.

Table 1: Channelized T1 and T3 Interface Operational Mode Commands

Task

Command

Display status information about channelized DS3-to-DS0 interfaces.

show interfaces (Channelized DS3-to-DS0)

Display status information about channelized DS3-to-DS1 interfaces.

show interfaces (Channelized DS3-to-DS1)

Display channelized T1 IQ interface information.

show interfaces (Channelized T1 IQ)

Display channelized T3 IQ interface information.

show interfaces (Channelized T3 IQ)

Display the interface names of the physical channelized T1 IQ interface and the channels configured on each interface.

show interfaces controller (Channelized T1 IQ)

Display the interface names of the physical channelized T3 IQ interface and the channels configured on each interface.

show interfaces controller (Channelized T3 IQ)

Note: For more information about the channel type and level of channelization, and for information about the number of channels that are supported on the different types of channelized T1 and T3 interfaces, see the JUNOS Network Interfaces Configuration Guide.

For more information on monitoring and troubleshooting channelized DS3-to-DS0 and DS3-to-DS1 interfaces, see the JUNOS Interfaces Network Operations Guide.

For channelization illustrations and configuration examples for channelized IQ interfaces, see the JUNOS Feature Guide.


Published: 2010-04-28