[an error occurred while processing this directive][an error occurred while processing this directive]

System Alarms on J Series Routers

Table 1 describes system alarms that may occur on J Series routers. These alarms are preset and cannot be modified.

Table 1: System Alarms on J Series Routers

Alarm Type

Alarm Summary

Remedy

Configuration

This alarm appears if you have not created a rescue configuration for the router. If you inadvertently commit a configuration that denies management access to the router, you must either connect a console to the router or invoke a rescue configuration. Using a rescue configuration is the recommended method. A rescue configuration is one that you know enables management access to the router.

Create the rescue configuration.

License

This alarm appears if you have configured at least one software feature that requires a feature license, but no valid license for the feature is currently installed.

Install a valid license key.


Published: 2010-04-26

[an error occurred while processing this directive]