[an error occurred while processing this directive][an error occurred while processing this directive]

vrrp-inet6-group

Syntax

vrrp-inet6-group group-id {(accept-data | no-accept-data);fast-interval milliseconds;inet6-advertise-interval seconds;(preempt | no-preempt) {hold-time seconds;}priority number;track {interface interface-name {priority-cost priority;bandwidth-threshold bits-per-second {priority-cost priority;}}priority-hold-time seconds;Unresolved xref prefix routing-instance instance-name {priority-cost priority;}}virtual-inet6-address [ addresses ];virtual-link-local-address ipv6-address;}

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family inet6 address address],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet6 address address]

Release Information

Statement introduced before JUNOS Release 7.4.

bandwidth-threshold option added in JUNOS Release 8.1.

Unresolved xref option added in JUNOS Release 9.0.

Description

Configure a Virtual Router Redundancy Protocol (VRRP) IPv6 group.

Options

group-id—VRRP group identifier. If you enable MAC source address filtering on the interface, you must include the virtual MAC address in the list of source MAC addresses that you specify in the source-address-filter statement. MAC addresses ranging from 00:00:5e:00:01:00 through 00:00:5e:00:01:ff are reserved for VRRP, as defined in RFC 2338. The VRRP group number must be the decimal equivalent of the last hexadecimal byte of the virtual MAC address.

Range: 0 through 255

The remaining statements are explained separately.

Usage Guidelines

See Unresolved xref.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-01-13

[an error occurred while processing this directive]