[an error occurred while processing this directive] [an error occurred while processing this directive]

vlan

Syntax

vlan (vlan-id | vlan-name) {
data-forwarding {
source {
groups group-prefix;
}
receiver {
source-vlans vlan-list;
install ;
}
}
disable {
interface interface-name;
}
immediate-leave;
interface interface-name {
group-limit limit;
multicast-router-interface;
static {
group ip-address;
}
}
proxy ;
query-interval seconds;
query-last-member-interval seconds;
query-response-interval seconds;
robust-count number;
}

Hierarchy Level

[edit protocols igmp-snooping]

Release Information

Statement introduced in JUNOS Release 9.1 for EX Series switches.

Statement updated with enhanced ? (CLI completion feature) functionality in JUNOS Release 9.5 for EX Series switches.

Description

Configure IGMP snooping parameters for a VLAN.

The remaining statements are explained separately.

Tip: To display a list of all configured VLANs on the system, including VLANs that are configured but not committed, type ? after vlan or vlans in your configuration mode command line. Note that only one VLAN is displayed for a VLAN range. For IGMP snooping, secondary private VLANs are not listed.

Default

IGMP snooping options apply to the specified VLAN.

Options

vlan-id—Numeric tag for a VLAN.

Range: 0 through 4095. Tags 0 and 4095 are reserved by JUNOS Software, and you should not configure them.

vlan-name—Name of a VLAN.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.


Published: 2009-07-22

[an error occurred while processing this directive]