Technical Documentation

vci

Syntax

vci vpi-identifier.vci-identifier;

Hierarchy Level

[edit interfaces at-fpc/pic/port unit logical-unit-number],[edit interfaces at-fpc/pic/port unit logical-unit-number family family address address multipoint-destination address],[edit logical-systems logical-system-name interfaces at- fpc/pic/port unit logical-unit-number],[edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number family family address address multipoint-destination address]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM point-to-point logical interfaces only, configure the virtual circuit identifier (VCI) and virtual path identifier (VPI).

To configure a VPI for a point-to-multipoint interface, specify the VPI in the multipoint-destination statement.

VCIs 0 through 31 are reserved for specific ATM values designated by the ATM Forum.

Options

vci-identifier—ATM virtual circuit identifier. Unless you configure the interface to use promiscuous mode, this value cannot exceed the largest numbered VC configured for the interface with the maximum-vcs option of the vpi statement.

Range: 0 through 4089 or 0 through 65,535 with promiscuous mode, with VCIs 0 through 31 reserved.

vpi-identifier—ATM virtual path identifier.

Range: 0 through 255
Default: 0

Usage Guidelines

See Applying Scheduler Maps to Logical ATM Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-14