Technical Documentation

unit (Dynamic PPPoE)


unit logical-unit-number {keepalives interval seconds;no-keepalives;pppoe-options {underlying-interface interface-name;server;}ppp-options {chap;pap;}family inet {unnumbered-address interface-name destination address destination-profile profile-name;address address;service {input {service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output {service-set service-set-name {service-filter filter-name;}}}filter {input filter-name {precedence precedence;}output filter-name {precedence precedence;}}}filter {input filter-name;output filter-name;}}

Hierarchy Level

[edit dynamic-profiles profile-name interfaces pp0]

Release Information

Statement introduced in JUNOS 10.1.


In a dynamic profile, configure a logical unit number for the dynamic PPPoE logical interface. You must configure a logical interface to be able to use the router.


logical-unit-number—In the unit logical-unit-number statement for dynamic PPPoE logical interfaces, you must use the predefined variable $junos-interface-unit in place of logical-unit-number. The variable is used to specify the unit number when the PPPoE logical interface is dynamically created. The $junos-interface-unit predefined variable is dynamically replaced with the unit number supplied by the router when the subscriber logs in.

The remaining statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Published: 2010-04-15