[an error occurred while processing this directive][an error occurred while processing this directive]

timeslots

Syntax

timeslots time-slot-range;

Hierarchy Level

[edit interfaces e1-fpc/pic/port],[edit interfaces t1-fpc/pic/port],[edit interfaces interface-name e1-options],[edit interfaces interface-name partition partition-number],[edit interfaces interface-name t1-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For E1 and T1interfaces, allocate the specific time slots by number.

Note: When configuring E1 or T1 interfaces on the 10-port Channelized E1/T1 IQE PIC, the timeslots statement must be included at the [edit interfaces e1-fpc/pic/port] or [edit interfaces t1-fpc/pic/port] hierarchy level as appropriate.

Options

time-slot-range—Actual time slot numbers allocated:

Range: Ranges vary by interface type and configuration option as follows:

Note: When creating fractional E1 interfaces only, if you connect a 4-port E1 PIC interface to a device that uses time slot numbering from 2 through 32, you must subtract 1 from the configured number of time slots.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]