[an error occurred while processing this directive][an error occurred while processing this directive]

thresholds

Syntax

thresholds thresholds;

Hierarchy Level

[edit services rpm probe owner test test-name]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Specify thresholds used for the probes. A system log message is generated when the configured threshold is exceeded. Likewise, an SNMP trap (if configured) is generated when a threshold is exceeded.

Options

thresholds—Specify one or more threshold measurements. The following options are supported:

  • egress-time—Measures maximum source-to-destination time per probe.
  • ingress-time—Measures maximum destination-to-source time per probe.
  • jitter-egress—Measures maximum source-to-destination jitter per test.
  • jitter-ingress—Measures maximum destination-to- source jitter per test.
  • jitter-rtt—Measures maximum jitter per test, from 0 through 60,000,000 microseconds.
  • rtt—Measures maximum round-trip time per probe, in microseconds.
  • std-dev-egress—Measures maximum source-to-destination standard deviation per test.
  • std-dev-ingress—Measures maximum destination-to-source standard deviation per test.
  • std-dev-rtt—Measures maximum standard deviation per test, in microseconds.
  • successive-loss—Measures successive probe loss count, indicating probe failure.
  • total-loss—Measures total probe loss count indicating test failure, from 0 through 15.

Usage Guidelines

See Configuring RPM Probes.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-28

[an error occurred while processing this directive]