[an error occurred while processing this directive][an error occurred while processing this directive]

three-color-policer (Configuring)

Syntax

three-color-policer policer-name {action {loss-priority high then discard;}logical-interface-policer;single-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;excess-burst-size bytes;}two-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;peak-information-rate bps;peak-burst-size bytes;}}

Hierarchy Level

[edit firewall]

Release Information

Statement introduced in JUNOS Release 7.4.

The action and single-rate statements added in JUNOS Release 8.2.

Description

For M320, MX Series, and T Series routers with Enhanced II Flexible PIC Concentrators (FPCs), configure a tricolor marking policer.

Options

single-rate—Marking is based on the CIR.

two-rate—Marking is based on the CIR and the PIR.

color-aware—Metering varies by preclassification. Metering can increase a packet’s assigned PLP, but cannot decrease it.

color-blind—All packets are evaluated by the CIR or CBS. If a packet exceeds the CIR or CBS, it is evaluated by the PIR or EBS.

committed-burst-size bytes—Guaranteed deliverable burst.

Range: 1500 through 100,000,000,000

committed-information-rate bps—Guaranteed bandwidth under normal line conditions.

Range: 1500 through 100,000,000,000

excess-burst-size bytes—Maximum allowable excess burst.

Range: 1500 through 100,000,000,000

peak-burst-size bytes—Maximum allowable burst.

Range: 1500 through 100,000,000,000

peak-information-rate bps—Maximum achievable rate.

Range: 1500 through 100,000,000,000

The remaining statements are explained separately.

Usage Guidelines

See Configuring Tricolor Marking Policers.

Required Privilege Level

firewall—To view this statement in the configuration.

firewall-control—To add this statement to the configuration.


Published: 2010-04-14

[an error occurred while processing this directive]