Technical Documentation

te-class-matrix

Syntax

te-class-matrix {tenumber {priority priority;traffic-class {ctnumber priority priority;}}}

Hierarchy Level

[edit logical-systems logical-system-name protocols mpls diffserv-te],[edit protocols mpls diffserv-te]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Specify the traffic engineering class matrix for a multiclass LSP or a DiffServ-aware traffic engineering LSP.

Default

The default traffic engineering class matrix is:

te-class-matrix {te0 traffic-class ct0 priority 7;te1 traffic-class ct1 priority 7;te2 traffic-class ct2 priority 7;te3 traffic-class ct3 priority 7;te4 traffic-class ct0 priority 0;te5 traffic-class ct1 priority 0;te6 traffic-class ct2 priority 0;te7 traffic-class ct3 priority 0;}

If you define any of the traffic engineering classes, all the default values are dropped.

Options

ctnumber—Specify the number of the class type. It can be one of four values: ct0, ct1, ct2, or ct3.

priority priority—Specify the priority of the class type. It can be one of eight values from 0 through 7.

tenumber—Specify the number of the traffic engineering class. It can be one of eight values: te0, te1, te2, te3, te4, te5, te6, or te7. You must configure the traffic engineering classes in order, starting with te0.

traffic-class—Specify the traffic class for the traffic engineering class.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-28