[an error occurred while processing this directive][an error occurred while processing this directive]

tag-protocol-id (TPID to Rewrite)

Syntax

tag-protocol-id tpid;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number input-vlan-map],[edit interfaces interface-name unit logical-unit-number output-vlan-map],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number input-vlan-map],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number output-vlan-map]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For Gigabit Ethernet IQ and 10-Gigabit Ethernet IQ2 and IQ2-E interfaces only, configure the outer TPID value. All TPIDs you include in input and output VLAN maps must be among those you specify at the [edit interfaces interface-name gigether-options ethernet-switch-profile tag-protocol-id [ tpids ]] hierarchy level.

For 10-port 10-Gigabit Oversubscribed Ethernet (OSE) interfaces on T Series routers, value the default TPID value (0x8100) is supported.

Default

If the tag-protocol-id statement is not configured, the TPID value is 0x8100.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]