[an error occurred while processing this directive][an error occurred while processing this directive]

tag-protocol-id (TPIDs Expected to Be Sent or Received)

Syntax

tag-protocol-id [ tpids ];

Hierarchy Level

[edit interfaces interface-name gigether-options ethernet-switch-profile],[edit interfaces interface-name aggregated-ether-options ethernet-switch-profile]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For Gigabit Ethernet IQ and 10-Gigabit Ethernet IQ2 and IQ2-E interfaces, aggregated Ethernet with Gigabit Ethernet IQ interfaces, and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC, and the built-in Gigabit Ethernet port on the M7i router), define the TPIDs expected to be sent or received on a particular VLAN. For each Gigabit Ethernet port, you can configure up to eight TPIDs using the tag-protocol-id statement; but only the first four TPIDs are supported on IQ2 and IQ2-E interfaces.

For 10-port 10-Gigabit Oversubscribed Ethernet (OSE) interfaces on T Series routers, only the default TPID value (0x8100) is supported.

Options

tpids—TPIDs to be accepted on the VLAN. Specify TPIDs in hexadecimal.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]