Technical Documentation

sustained-data-rate (All Streams)

Syntax

sustained-data-rate {default bytes-per-second;maximum bytes-per-second;minimum bytes-per-second;rtcp-include;}

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 9.2.

maximum and minimum options introduced in JUNOS Release 9.5.

Description

Configure the sustained data rate for streams of any protocol, including RTP.

Default

The BGF uses the default value of 10,000 bytes per second if the Policy command in H.248 messages in ON and both of the following apply:

  • The sustained data rate is not set in the H.248 message.
  • There is no CLI configuration for sustained data rate.

Options

default bytes-per-second—Default value for sustained data rate.

Range: 125 through 4,294,967,295

maximum bytes-per-second—Maximum value for sustained data rate.

Range: 125 through 4,294,967,295

minimum bytes-per-second—Minimum value for sustained data rate.

Range: 125 through 4,294,967,295

rtcp-include—Include rtcp bandwidth in the sustained data rate.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-28