[an error occurred while processing this directive][an error occurred while processing this directive]

sustained-data-rate (RTCP Streams)

Syntax

sustained-data-rate {rtcp (fixed-value bytes-per-second | percentage percentage);}

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 9.2.

Description

Configure the sustained data rate for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of RTP’s sustained data rate.

Default

The virtual BGF uses the default value of 5 percent of the RTP gates’s rate if the Policy command in H.248 messages in ON and both of the following apply:

  • The sustained data rate is not set in the H.248 message.
  • There is no CLI configuration for sustained data rate.

Options

fixed-value —Value entered is a fixed number of bits per second.

bytes-per-second—Sustained data rate.

Range: 125 through 4,294,967,295

percentage bytes-per-second—Value entered is a percentage of the RTP’s gate rate.

percentage—Value entered is a percentage of the RTP’s gate rate.

Range: 0 through 1000

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-28

[an error occurred while processing this directive]