[an error occurred while processing this directive][an error occurred while processing this directive]

subscriber-leave-timer

Syntax

subscriber-leave-timer seconds;

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name routing-options multicast interface interface-name],[edit logical-systems logical-system-name routing-options multicast interface interface-name],[edit routing-instances routing-instance-name routing-options multicast interface interface-name],[edit routing-options multicast interface interface-name]

Release Information

Statement introduced in JUNOS Release 9.2.

Statement introduced in JUNOS Release 9.2 for EX Series switches.

Description

Length of time before the multicast VLAN updates QoS data (for example, available bandwidth) for subscriber interfaces after it receives an IGMP leave message.

Options

seconds—Length of time before the multicast VLAN updates QoS data (for example, available bandwidth) for subscriber interfaces after it receives an IGMP leave message. Specifying a value of 0 results in an immediate update; this is the same as if the statement were not configured.

Range: 0 through 30
Default: 0 seconds

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-16

[an error occurred while processing this directive]