[an error occurred while processing this directive][an error occurred while processing this directive]

static

Syntax

static {incoming-label label;outgoing-label label;}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls mesh-group mesh-group-name neighbor address],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls neighbor address],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls neighbor address backup-neighbor address],[edit routing-instances routing-instance-name protocols vpls mesh-group mesh-group-name neighbor address],[edit routing-instances routing-instance-name protocols vpls neighbor address],[edit routing-instances routing-instance-name protocols vpls neighbor address backup-neighbor address]

Release Information

Statement introduced in JUNOS Release 10.2.

Description

Specifies a static pseudowire for a VPLS domain. By configuring static pseudowires for the VPLS domain, you do not need to configure the LDP or BGP protocols that would normally be used for signaling. Static pseudowires require that you configure a set of in and out labels for each pseudowire configured for the VPLS domain. You can configure both static and dynamic neighbors within the same VPLS routing instance. You can also configure a static pseudowire for a backup neighbor (if you configure the neighbor as static the backup must also be static) and for a mesh group.

Options

incoming-label label—You must configure an incoming label for the static pseudowire.

Range: 29,696 through 41,983 and 1,000,000 through 1,048,575

outgoing-label label—You must configure an outgoing label for the static pseudowire.

Range: 16 through 1,048,575

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-28

[an error occurred while processing this directive]