[an error occurred while processing this directive] [an error occurred while processing this directive]

shutdown-threshold

Syntax

shutdown-threshold number;

Hierarchy Level

[edit vlans vlan-name dot1q-tunneling layer2-protocol-tunneling all | protocol-name]

Release Information

Statement introduced in JUNOS Release 10.0 for EX Series switches.

Description

Specify the maximum number of Layer 2 PDUs of the specified protocol that can be received per second on the interfaces in a specified VLAN before the interface is disabled. Once an interface is disabled, you must explicitly reenable it using the clear ethernet-switching layer2-protocol-tunneling error command. Otherwise, the interface remains disabled.

The shutdown threshold value must be greater than or equal to the drop threshold value. If the shutdown threshold value is less than the drop threshold value, the drop threshold value has no effect.

You can specify a shutdown threshold value without specifying a drop threshold value.

Default

No shutdown threshold is specified.

Options

number—Maximum number of Layer 2 PDUs of the specified protocol that can be received per second on the interfaces in a specified VLAN before the interface is disabled.

Range: 1 through 1000

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.


Published: 2009-10-13

[an error occurred while processing this directive]