[an error occurred while processing this directive][an error occurred while processing this directive]

shaping

Syntax

shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}

Hierarchy Level

[edit interfaces interface-name atm-options vpi vpi-identifier],[edit interfaces interface-name unit logical-unit-number],[edit interfaces interface-name unit logical-unit-number address address family family multipoint-destination address],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number address address family family multipoint-destination address]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM encapsulation only, define the traffic-shaping profile.

For Circuit Emulation PICs, specifying traffic shaping in the ingress and egress directions.

For ATM2 IQ interfaces, changing or deleting VP tunnel traffic shaping causes all logical interfaces on a VP to be deleted and then re-added.

VP tunnels are not supported on multipoint interfaces.

The statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]