Technical Documentation

service-filter (Dynamic Service Sets)

Syntax

service-filter filter-name;

Hierarchy Level

[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family family service input service-set service-set-name],[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family family service output service-set service-set-name],[edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” family family service input service-set service-set-name],[edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” family family service output service-set service-set-name]

Release Information

Statement introduced in JUNOS Release 9.5.

The [edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” family family service input service-set service-set-name] hierarchy and [edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” family family service output service-set service-set-name] hierarchy added in JUNOS 10.1.

Description

Define the filter to be applied to traffic before it is accepted for service processing. Configuration of a service filter is optional; if you include the service-set statement without a service-filter definition, the router software assumes that the match condition is true and selects the service set for processing automatically. Only the Internet Protocol version 4 (IPv4) protocol family is currently supported for dynamic PPPoE logical interfaces.

Options

filter-name—Identifies the filter to be applied in service processing.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-15