[an error occurred while processing this directive][an error occurred while processing this directive]

serial-options

Syntax

serial-options {clock-rate rate;clocking-mode (dce | loop);control-polarity (negative | positive);cts-polarity (negative | positive);dcd-polarity (negative | positive);dce-options {control-signal (assert | de-assert | normal);cts (ignore | normal | require);dcd (ignore | normal | require);dsr (ignore | normal | require);dtr signal-handling-option;ignore-all;indication (ignore | normal | require);rts (assert | de-assert | normal);tm (ignore | normal | require);}dsr-polarity (negative | positive);dte-options {control-signal (assert | de-assert | normal);cts (ignore | normal | require);dcd (ignore | normal | require);dsr (ignore | normal | require);dtr signal-handling-option;ignore-all;indication (ignore | normal | require);rts (assert | de-assert | normal);tm (ignore | normal | require);}dtr-circuit (balanced | unbalanced);dtr-polarity (negative | positive);encoding (nrz | nrzi);indication-polarity (negative | positive);line-protocol protocol;loopback (dce-local | dce-remote | local | remote);rts-polarity (negative | positive);tm-polarity (negative | positive);transmit-clock invert;}

Hierarchy Level

[edit interfaces se-pim/0/port]

Release Information

Statement introduced prior to JUNOS Release 7.4.

Description

Configure serial-specific interface properties.

The statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]