Technical Documentation

selective

Syntax

selective {group multicast-prefix/prefix-length {source ip-prefix/prefix-length {pim-ssm {group-range multicast-prefix;}rsvp-te {label-switched-path-template {(default-template | lsp-template-name);}static-lsp point-to-multipoint-lsp-name;}threshold-rate kbps;}wildcard-source {pim-ssm {group-range multicast-prefix;}rsvp-te {label-switched-path-template {(default-template | lsp-template-name);}}static-lsp point-to-multipoint-lsp-name;}threshold-rate kbps;}}tunnel-limit number;wildcard-group-inet {wildcard-source {pim-ssm {group-range multicast-prefix;}rsvp-te {label-switched-path-template {(default-template | lsp-template-name);}static-lsp lsp-name;}threshold-rate number;}}wildcard-group-inet6 {wildcard-source {pim-ssm {group-range multicast-prefix;}rsvp-te {label-switched-path-template {(default-template | lsp-template-name);}static-lsp lsp-name;}threshold-rate number;}}}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name provider-tunnel],[edit routing-instances routing-instance-name provider-tunnel]

Release Information

Statement introduced in JUNOS Release 8.5.

Description

Configure selective point-to-multipoint LSPs for an MBGP MVPN. Selective point-to-multipoint LSPs send traffic only to the receivers configured for the MBGP MVPNs, helping to minimize flooding in the service provider's network.

The remaining statements are explained separately.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-28