[an error occurred while processing this directive][an error occurred while processing this directive]



secondary path-name {adaptive; admin-group { exclude [ group-names ];include-all [ group-names ];include-any [ group-names ];}bandwidth bps;class-of-service cos-value; hop-limit number; no-cspf;no-decrement-ttl;optimize-timer seconds; preference preference;priority setup-priority reservation-priority; (record | no-record); retry-limit number;retry-timer seconds;select (manual | unconditional);standby; }

Hierarchy Level

[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],[edit protocols mpls label-switched-path lsp-name]

Release Information

Statement introduced before JUNOS Release 7.4.


Specify one or more secondary paths to use for the LSP. You can configure more than one secondary path. All secondary paths are equal, and the first one that is available is chosen.

You can specify secondary paths even if you have not specified any primary paths.

Optionally, you can specify preference, CoS, and bandwidth values for the secondary path, which override any equivalent values that you configure for the LSP (at the [edit mpls label-switched-path] hierarchy level).


path-name—Name of a path that you created with the path statement.

The remaining statements are explained separately.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Published: 2010-04-28

[an error occurred while processing this directive]