[an error occurred while processing this directive][an error occurred while processing this directive]

satop-options

Syntax

satop-options { excessive-packet-loss-rate {apply-groups group-nameapply-groups-except group-namegroups group-namesample-period millisecondsthreshold percentile)idle-pattern patternjitter-buffer-auto-adjustjitter-buffer-latency millisecondsjitter-buffer-packets packetspayload-size bytes;}

Hierarchy Level

[edit interfaces interface-name]

Release Information

Statement introduced in JUNOS Release 9.3.

Description

Set Structure-Agnostic TDM over Packet (SAToP) protocol options.

Options

excessive-packet-loss-rate <options>—Packet loss options.

  • apply-groups group-name—Groups from which to inherit configuration data.
  • apply-groups-except group-name—Don't inherit configuration data from these groups.
  • groups group-name—Specify groups.
  • sample-period milliseconds—Number of milliseconds over which excessive packet loss rate is calculated.
  • threshold percentile—Percentile designating the threshold of excessive packet loss rate (from 1 to 100).

idle-pattern pattern—An 8–bit hexadecimal pattern to replace TDM data in a lost packet (from 0 to 255).

jitter-buffer-auto-adjust—Automatically adjust the jitter buffer.

jitter-buffer-latency milliseconds—Number of milliseconds delay in jitter buffer (from 1 to 1000 milliseconds).

jitter-buffer-packets packets—Number of packets in jitter buffer (from 1 to 64).

payload-size bytes—Payload size in integer number of bytes.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]