[an error occurred while processing this directive][an error occurred while processing this directive]

rsvp-te

Syntax

rsvp-te entry-name {destination-networks network-prefix;label-switched-path-template {default-template;template-name;}}

Hierarchy Level

[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name],[edit routing-options dynamic-tunnels tunnel-name]

Release Information

Statement introduced in JUNOS Release 10.1.

Description

Enable RSVP to automatically establish LSPs for any new PE router added to a full mesh of LSPs. To enable this feature, you must configure the rsvp-te statement on all of the PE routers in the full mesh.

Options

destination-networks network-prefix—Specify the IP version 4 (IPv4) prefix range for the destination network. Dynamic tunnels within the specified IPv4 prefix range are allowed to be initiated.

entry-name—Specify the entry for the RSVP tunnel.

label-switched-path-template—Configure the default template using the default-template option, or configure your own template using the template-name option.

Usage Guidelines

See Configuring RSVP Automatic Mesh.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-28

[an error occurred while processing this directive]