Technical Documentation

retransmit-interval

Syntax

retransmit-interval seconds;

Hierarchy Level

[edit logical-systems logical-system-name protocols ospf area area-id peer-interface interface-name],[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols (ospf | ospf3) area area-id virtual-link],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name],[edit protocols ospf area area-id peer-interface interface-name],[edit protocols (ospf | ospf3) area area-id interface interface-name],[edit protocols (ospf | ospf3) area area-id virtual-link],[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id virtual-link],[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name]

Release Information

Statement introduced before JUNOS Release 7.4.

Statement introduced in JUNOS Release 9.0 for EX Series switches.

Support for the realm statement introduced in JUNOS Release 9.2.

Support for the realm statement introduced in JUNOS Release 9.2 for EX Series switches.

Description

Specify how long the routing device waits to receive a link-state acknowledgment packet before retransmitting link-state advertisements to an interface’s neighbors.

Options

seconds—Interval to wait.

Range: 1 through 65,535 seconds
Default: 5 seconds

Note: You must configure link-state advertisement (LSA) retransmit intervals to be equal to or greater than 3 seconds to avoid triggering a retransmit trap, because the JUNOS Software delays LSA acknowledgments by up to 2 seconds.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-14