[an error occurred while processing this directive][an error occurred while processing this directive]



protection-revert-time seconds;

Hierarchy Level

[edit logical-systems logical-system-name protocols mpls interface interface-name static],[edit protocols mpls interface interface-name static]

Release Information

Statement introduced in JUNOS Release 10.1.


Specify the amount of time (in seconds) that a static LSP must wait before traffic reverts from the bypass path to the original path.

If you have configured a value of 0 seconds for the protection-revert-time statement and traffic is switched to the bypass path, the traffic remains on that path indefinitely. It is never switched back to the original path unless the bypass path is down or you intervene.


seconds—Time in seconds.

Range: 0 through 65,535 seconds
Default: 5 seconds

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Published: 2010-04-28

[an error occurred while processing this directive]