[an error occurred while processing this directive][an error occurred while processing this directive]

priority-hold-time

Syntax

priority-hold-time seconds;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family (inet | inet6) address address (vrrp | vrrp-inet6-group) group-id track],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family (inet | inet6) address address (vrrp | vrrp-inet6-group) group-id track]

Release Information

Statement introduced in JUNOS Release 8.1.

Description

Configure a Virtual Router Redundancy Protocol (VRRP) router’s priority hold time to define the minimum length of time that must elapse between dynamic priority changes. If the dynamic priority changes because of a tracking event, the priority hold timer begins. If another tracking event or manual configuration change occurs while the timer is running, the new dynamic priority update is postponed until the timer expires.

Options

seconds—The minimum length of time that must elapse between dynamic priority changes.

Range: 1 through 3600 seconds

Usage Guidelines

See Configuring a Logical Interface to Be Tracked.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-01-13

[an error occurred while processing this directive]