Technical Documentation

pp0 (Dynamic PPPoE)

Syntax

pp0 {unit logical-unit-number {keepalives interval seconds;no-keepalives;pppoe-options {underlying-interface interface-name;server;}ppp-options {chap;pap;}family inet {unnumbered-address interface-name destination address destination-profile profile-name;address address;service {input {service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output {service-set service-set-name {service-filter filter-name;}}}filter {input filter-name {precedence precedence;}output filter-name {precedence precedence;}}}}}

Hierarchy Level

[edit dynamic-profiles profile-name interfaces]

Release Information

Statement introduced in JUNOS Release 10.1.

Description

Configure the dynamic PPPoE logical interface in a dynamic profile. When the router creates a dynamic PPPoE logical interface on an underlying Ethernet interface configured with PPPoE (ppp-over-ether) encapsulation, it uses the information in the dynamic profile to determine the properties of the dynamic PPPoE logical interface.

The remaining statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-15