[an error occurred while processing this directive][an error occurred while processing this directive]



pim-to-igmp-proxy {upstream-interface [ interface-names ];}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name routing-options multicast],[edit logical-systems logical-system-name routing-options multicast],[edit routing-instances routing-instance-name routing-options multicast],[edit routing-options multicast]

Release Information

Statement introduced in JUNOS Release 9.6.

Statement introduced in JUNOS Release 9.6 for EX Series switches.


Configure the rendezvous point (RP) routing device that resides between a customer edge–facing Protocol Independent Multicast (PIM) domain and a core-facing PIM domain to translate PIM join or prune messages into corresponding Internet Group Management Protocol (IGMP) report or leave messages. The routing device then transmits the report or leave messages by proxying them to one or two upstream interfaces that you configure on the RP routing device. Including the pim-to-igmp-proxy statement enables you to use IGMP to forward IPv4 multicast traffic across the PIM sparse mode domains.

The remaining statement is explained separately.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Published: 2010-04-16

[an error occurred while processing this directive]