[an error occurred while processing this directive][an error occurred while processing this directive]

peak-data-rate (RTCP)

Syntax

peak-data-rate {rtcp (fixed-value bytes | percentage percentage);}

Hierarchy Level

[edit services services pgcp gateway gateway-name h248-properties traffic-management]

Release Information

Statement introduced in JUNOS Release 9.2.

Description

Configure the peak data rate for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of the RTP gate’s rate.

Default

The BGF uses the default value of 5 percent of the RTP gate's rate if the Policy command in H.248 messages in ON and both of the following apply:

  • The peak data rate is not set in the H.248 message.
  • There is no CLI configuration for peak data rate.

Options

fixed-value —Value entered is a fixed number of bits per second.

bytes-per-second—Peak data rate.

Range: 125 through 4,294,967,295

percentage —Value entered is a percentage of the RTP gate’s rate.

percentage—Value entered is a percentage of the RTP’s gate rate.

Range: 0 through 1000

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-28

[an error occurred while processing this directive]