[an error occurred while processing this directive][an error occurred while processing this directive]

outbound-route-filter

Syntax

outbound-route-filter {bgp-orf-cisco-mode;prefix-based {accept {(inet | inet6);}}}

Hierarchy Level

[edit logical-systems logical-system-name protocols bgp],[edit logical-systems logical-system-name protocols bgp group group-name],[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name neighbor address],[edit protocols bgp],[edit protocols bgp group group-name],[edit protocols bgp group group-name neighbor address],[edit routing-instances routing-instance-name protocols bgp],[edit routing-instances routing-instance-name protocols bgp group group-name],[edit routing-instances routing-instance-name protocols bgp group group-name neighbor address]

Release Information

Statement introduced in JUNOS Release 9.2.

Statement introduced in JUNOS Release 9.2 for EX Series switches.

Description

Configure a BGP peer to accept outbound route filters from a remote peer.

Options

accept—Specify that outbound route filters from a BGP peer be accepted.

inet—Specify that IPv4 prefix-based outbound route filters be accepted.

inet6—Specify that IPv6 prefix-based outbound route filters be accepted.

Note: You can specify that both IPv4 and IPv6 outbound route filters be accepted.

prefix-based—Specify that prefix-based filters be accepted.

The bgp-orf-cisco-mode statement is explained separately.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-14

[an error occurred while processing this directive]