Technical Documentation

operating-mode

Syntax

operating-mode mode;

Hierarchy Level

[edit interfaces at-fpc/pic/port dsl-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For J Series Services Routers only, modify the operating mode of the digital subscriber line for an ATM interface.

Options

mode—Operating mode for ATM-over-ADSL interfaces. The mode can be one of the following:

  • adsl2plus—Set the ADSL line to train in the ITU G.992.5 mode.
  • ansi-dmt—Set the ADSL line to train in the ANSI T1.413 Issue 2 mode.
  • auto—Set the ADSL line to autonegotiate the setting to match the setting of the DSL access multiplexer (DSLAM) located at the central office. The ADSL line trains in the ANSI T1.413 Issue 2 (ansi-dmt) or ITU G.992.1 (itu-dmt) mode.
  • etsi—Set the ADSL line to train in the ETSI TS 101 388 V1.3.1 mode.
  • itu-annexb-ur2—Set the ADSL line to train in the ITU G.992.1 UR-2 mode.
  • itu-annexb-non-ur2—Set the ADSL line to train in the ITU G.992.1 non-UR-2 mode.
  • itu-dmt—Set the ADSL line to train in the ITU G.992.1 mode.
  • itu-dmt-bis—Set the ADSL line to train in the ITU G.992.3 mode.
Default: auto

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20