[an error occurred while processing this directive][an error occurred while processing this directive]

node-link-protection

Syntax

node-link-protection;

Hierarchy Level

[edit protocols (ospf | ospf3) protocols area area-id interface interface-name],[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name],[edit protocols ospf3 realm ipv4-unicast area area-id interface interface-name],[edit logical-systems logical-system-name ospf3 realm ipv4-unicast area area-id interface interface-name],[edit routing-instances routing-instance-name ospf3 realm ipv4-unicast area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name ospf3 realm ipv4-unicast area area-id interface interface-name],

Release Information

Statement introduced in JUNOS Release 10.0.

Description

Enable node-link protection on the specified OSPF interface. The JUNOS Software creates an alternate loop-free path to the primary next hop for all destination routes that traverse a protected interface. This alternate path avoids the primary next-hop router altogether and establishes a path through a different router.

Note: This feature is not supported for the OSPF IPv4 multicast topology or for the OSPFv3 IPv4 multicast or IPv6 multicast topologies because node-link protection creates alternate next-hop paths only for unicast routes.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-14

[an error occurred while processing this directive]