[an error occurred while processing this directive][an error occurred while processing this directive]

no-tunnel-services

Syntax

no-tunnel-services;

Hierarchy Level

[edit logical-systems logical-system-name protocols vpls static-vpls],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls],[edit protocols vpls static-vpls],[edit routing-instances routing-instance-name protocols vpls]

Release Information

Statement introduced in JUNOS Release 7.6. Support for static VPLS added in JUNOS Release 10.2.

Description

Configure VPLS on a router without a Tunnel Services PIC. Configuring the no-tunnel-services statement creates a label-switched interface (LSI) to provide VPLS functionality. An LSI MPLS label is used as the inner label for VPLS. This label maps to a VPLS routing instance. On the PE router, the LSI label is stripped and then mapped to a logical LSI interface. The Layer 2 Ethernet frame is then forwarded using the LSI interface to the correct VPLS routing instance.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-28

[an error occurred while processing this directive]