Technical Documentation

Downloads
no-mac-learning

no-mac-learning

Syntax

no-mac-learning;

Hierarchy Level

[edit bridge-domains bridge-domain-name bridge-options],[edit logical-systems logical-system-name bridge-domains bridge-domain-name bridge-options],[edit logical-systems logical-system-name bridge-domains bridge-domain-name bridge-options interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name bridge-domains bridge-domain-name bridge-options],[edit logical-systems logical-system-name routing-instances routing-instance-name bridge-domains bridge-domain-name bridge-options interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name switch-options],[edit logical-systems logical-system-name switch-options],[edit bridge-domains bridge-domain-name bridge-options interface interface-name],[edit routing-instances routing-instance-name bridge-domains bridge-domain-name bridge-options],[edit routing-instances routing-instance-name bridge-domains bridge-domain-name bridge-options interface interface-name],[edit routing-instances routing-instance-name switch-options],[edit switch-options]

Release Information

Statement introduced in JUNOS Release 8.4.

Support for the switch-options statement added in JUNOS Release 9.2.

Support for top-level configuration for the virtual-switch type of routing instance added in JUNOS Release 9.2. In JUNOS Release 9.1 and earlier, the routing instances hierarchy supported this statement only for a VPLS instance or bridge domain configured within a virtual switch.

Support for logical systems added in JUNOS Release 9.6.

Description

(MX Series routers only) Disable MAC learning for a virtual switch, for a bridge domain, for a specific logical interface in a bridge domain, or for a set of bridge domains associated with a Layer 2 trunk port.

Default

MAC learning is enabled. Use no-mac-learning to disable MAC learning.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.