metric
Syntax
Hierarchy Level
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name protocols ospf area area-id interface interface-name topology (ipv4-multicast | name)],[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)
area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id sham-link-remote],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id interface interface-name topology (ipv4-multicast | name)],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name],[edit protocols (ospf | ospf3) area area-id interface interface-name],[edit protocols ospf area area-id interface interface-name topology (ipv4-multicast | name)],[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast
| ipv6-multicast) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols ospf area area-id sham-link-remote],[edit routing-instances routing-instance-name protocols ospf area area-id interface interface-name topology (ipv4-multicast | name)],[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)
area area-id interface interface-name] Release Information
Statement introduced before JUNOS Release 7.4.
Statement introduced in JUNOS Release 9.0 for EX Series switches.
Support for Multitopology Routing introduced in JUNOS Release 9.0.
Support for Multitopology Routing introduced in JUNOS Release 9.0
for EX Series switches.
Support for the realm statement introduced in JUNOS
Release 9.2.
Support for the realm statement introduced in JUNOS
Release 9.2 for EX Series switches.
Description
Specify the cost of an OSPF interface. The cost
is a routing metric that is used in the link-state calculation.
To set the cost of routes exported into OSPF, configure the
appropriate routing policy.
Options
metric—Cost
of the route.
- Range: 1 through 65,535
- Default: By default, the cost of an OSPF route is calculated
by dividing the reference-bandwidth value by the bandwidth of the
physical interface. Any specific value you configure for the metric overrides the default behavior of using the reference-bandwidth
value to calculate the cost of route for that interface.
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement to the configuration.
Published: 2010-04-14
