[an error occurred while processing this directive][an error occurred while processing this directive]

max-sessions (Dynamic PPPoE)

Syntax

max-sessions number;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number pppoe-underlying-options],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number pppoe-underlying-options]

Release Information

Statement introduced in JUNOS Release 10.1.

Description

Configure the maximum number of dynamic PPPoE logical interfaces that the router can activate on the underlying interface. The max-sessions value does not affect the maximum number of static PPPoE logical interfaces that can be configured on the underlying interface.

Options

number—Maximum number of dynamic PPPoE logical interfaces (sessions) that the router can activate on the underlying interface. The default value is equal to the maximum number of PPPoE sessions supported on your routing platform. You can configure from 1 to the platform-specific default for your routing platform. Changing the max-sessions value has no effect on dynamic PPPoE logical interfaces that are already active.

Range:
  • For Intelligent Queuing 2 (IQ2) PICs on M120 and M320 Series routers, 1 through 4000.
  • For Trio MPC/MIC interfaces on MX Series routers, 1 through 32000.
Default:
  • For Intelligent Queuing 2 (IQ2) PICs on M120 and M320 Series routers, 4000.
  • For Trio MPC/MIC interfaces on MX Series routers, 32000.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-15

[an error occurred while processing this directive]