Technical Documentation

leave-timer (MVRP)

Syntax

leave-timer milliseconds;

Hierarchy Level

[edit logical-systems logical-system-name protocols mvrp],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type),[edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type),[edit logical-systems logical-system-name protocols mvrp interface (all | interface-name)],[edit protocols mvrp interface (all | interface-name)],[edit routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type),[edit routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type)

Release Information

Statement introduced in JUNOS Release 10.1 for MX Series routers.

Description

For Multiple VLAN Registration Protocol (MVRP), configure the number of milliseconds the switch retains a VLAN in the Leave state before the VLAN is unregistered. If the interface receives a join message before this timer expires, the VLAN remains registered.

Default

1000 milliseconds

Options

milliseconds—Interval that the switch retains a VLAN in the Leave state before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice the join-timer interval. Maintain default timer settings unless there is a compelling reason to change the settings. Modifying timers to inappropriate values might cause an imbalance in the operation of MVRP.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.


Published: 2010-05-11