Technical Documentation

label-switched-path

Syntax

label-switched-path lsp-name { disable; adaptive;admin-down;admin-group { exclude [ group-names ];include-all [ group-names ];include-any [ group-names ];}auto-bandwidth {adjust-interval seconds;adjust-threshold percentage;maximum-bandwidth bps;minimum-bandwidth bps;monitor-bandwidth;}bandwidth bps {ct0 bps;ct1 bps;ct2 bps;ct3 bps;}class-of-service cos-value;description text;fast-reroute {(bandwidth bps | bandwidth-percent percentage);(exclude [ group-names ] | no-exclude);hop-limit number;(include-all [ group-names ] | no-include-all);(include-any [ group-names ] | no-include-any);}from address; hop-limit number;install { destination-prefix/prefix-length <active>;}ldp-tunneling;link-protection;lsp-attributes {encoding-type (ethernet | packet | pdh | sonet-sdh);gpid (ethernet | hdlc | ipv4 | pos-scrambling-crc-16 | pos-no-scrambling-crc-16 | pos-scrambling-crc-32 | pos-no-scrambling-crc-32 | ppp);signal-bandwidth type;switching-type (fiber | lambda | psc-1 | tdm);}metric metric;no-cspf;no-decrement-ttl;node-link-protection;optimize-timer seconds;p2mp lsp-name;policing {filter filter-name;no-auto-policing;}preference preference;primary path-name { adaptive; admin-group {exclude [ group-names ];include-all [ group-names ];include-any [ group-names ];}bandwidth bps {ct0 bps;ct1 bps;ct2 bps;ct3 bps;}class-of-service cos-value; hop-limit number; no-cspf;no-decrement-ttl;optimize-timer seconds; preference preference;priority setup-priority reservation-priority; (record | no-record);select (manual | unconditional);standby;}priority setup-priority reservation-priority; (random | least-fill | most-fill);(record | no-record); retry-limit number;retry-timer seconds;revert-timer seconds;secondary path-name { adaptive; admin-group {excludegroup-names ];include-all [ group-names ];include-any [ group-names ];}bandwidth bps {ct0 bps;ct1 bps;ct2 bps;ct3 bps;}class-of-service cos-value; hop-limit number; no-cspf;no-decrement-ttl;optimize-timer seconds; preference preference;priority setup-priority reservation-priority; (record | no-record);select (manual | unconditional);standby;}soft-preemption;standby; to address;traceoptions { file filename <files number> <size size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}}

Hierarchy Level

[edit logical-systems logical-system-name protocols mpls],[edit protocols mpls]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure an LSP to use in dynamic MPLS. When configuring an LSP, you must specify the address of the egress router in the to statement. All remaining statements are optional.

Options

lsp-name—Name that identifies the LSP. The name can be up to 32 characters and can contain letters, digits, periods, and hyphens. To include other characters, enclose the name in quotation marks. The name must be unique within the ingress router.

The remaining statements are explained separately.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-28