[an error occurred while processing this directive][an error occurred while processing this directive]

interface

Syntax

interface (all | interface-name) {accept-remote-source;disable;bfd-liveness-detection {authentication {algorithmalgorithm-name;key-chainkey-chain-name;loose-check;}detection-time {threshold milliseconds;}minimum-interval milliseconds;minimum-receive-interval milliseconds;multiplier number;version (0 | 1 | automatic);}family (inet | inet6) {disable;}hello-interval seconds;mode (dense | sparse | sparse-dense);neighbor-policy [ policy-names ];override-interval milliseconds;priority number;propagation-delay milliseconds;reset-tracking-bit;version version;}

Hierarchy Level

[edit logical-systems logical-system-name protocols pim],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols pim],[edit protocols pim],[edit routing-instances routing-instance-name protocols pim]

Release Information

Statement introduced before JUNOS Release 7.4.

Statement introduced in JUNOS Release 9.0 for EX Series switches.

Description

Enable PIM on an interface and configure interface-specific properties.

Options

interface-name—Name of the interface. Specify the full interface name, including the physical and logical address components. To configure all interfaces, you can specify all. For details about specifying interfaces, see the JUNOS Network Interfaces Configuration Guide.

The remaining statements are explained separately.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-16

[an error occurred while processing this directive]