Technical Documentation

Downloads
inet6-vpn

Related Topics
Configuring Layer 3 VPNs to Carry IPv6 Traffic
JUNOS Routing Protocols Configuration Guide

inet6-vpn

Syntax

inet6-vpn (any | multicast | unicast) {aggregate-label;prefix-limit maximum;rib-group rib-group-name;}

Hierarchy Level

[edit logical-systems logical-system-name protocols bgp family],[edit logical-systems logical-system-name protocols bgp group group-name family],[edit protocols bgp family],[edit protocols bgp group group-name family]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Enable IP version 6 (IPv6) on the provider edge (PE) router for the Layer 3 VPN.

Options

any—Configure the family type to be both multicast and unicast.

multicast—Configure the family type to be multicast. This means that the BGP peers are being used only to carry the unicast routes that are being used by multicast for resolving the multicast routes.

prefix-limit maximum—Maximum prefix limit.

Range: 1 through 4,294,967,295

Default: 1

rib-group rib-group-name—The name of the routing table group.

unicast—Configure the family type to be unicast. This means that the BGP peers only carry the unicast routes that are being used for unicast forwarding purposes.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.