[an error occurred while processing this directive][an error occurred while processing this directive]



idle-cycle-flag value;

Hierarchy Level

[edit interfaces e1-fpc/pic/port],[edit interfaces t1-fpc/pic/port],[edit interfaces interface-name ds0-options],[edit interfaces interface-name e1-options],[edit interfaces interface-name e3-options],[edit interfaces interface-name serial-options],[edit interfaces interface-name t1-options],[edit interfaces interface-name t3-options]

Release Information

Statement introduced before JUNOS Release 7.4.


Configure the value that the DS0, E1, E3, T1, or T3 interface transmits during idle cycles.

Note: When configuring E1 or T1 interfaces on 10-port Channelized E1/T1 IQE PICs, the idle-cycle-flag statement must be included at the [edit interfaces e1-fpc/pic/port] or [edit interfaces t1-fpc/pic/port] hierarchy level as appropriate.


value—Value to transmit in the idle cycles:

  • flags—Transmit the value 0x7E.
  • ones—Transmit the value 0xFF (all ones).
Default: Flags

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Published: 2010-04-20

[an error occurred while processing this directive]