[an error occurred while processing this directive][an error occurred while processing this directive]

idle-after-switch-over

Syntax

idle-after-switch-over (forever | seconds);

Hierarchy Level

[edit logical-systems logical-system-name protocols bgp],[edit logical-systems logical-system-name protocols bgp group group-name],[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],[edit protocols bgp],[edit protocols bgp group group-name],[edit protocols bgp group group-name neighbor address]

Release Information

Statement introduced in JUNOS Release 9.5.

Statement introduced in JUNOS Release 9.5 for EX Series switches.

Description

Configure the routing device not to automatically reestablish BGP peering sessions after a nonstop active routing (NSR) switchover. This feature is particularly useful if you are using dynamic routing policies because the dynamic database is not synchronized with the backup Routing Engine when NSR is enabled.

Options

forever—Do not reestablish a BGP peering session after an NSR switchover until the clear bgp neighbor command is issued.

seconds—Do not reestablish a BGP peering session after an NSR switchover until after the specified period.

Range: 1 through 4,294,967,295 (232 – 1)

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-14

[an error occurred while processing this directive]