Technical Documentation

group (Dynamic IGMP Interface)

Syntax

For group configuration with a source, use the following syntax:

group ip-address {source ip-address;}

For group configuration without a source, use the following syntax:

group group;

Hierarchy Level

[edit dynamic-profiles profile-name protocols igmp interface interface-name static],

Release Information

Statement introduced in JUNOS Release 9.2.

Description

When configuring with a source address, configure the IGMP multicast group address that receives data on an interface and a source address for certain packets. For configuration without a source address, configure only the IGMP multicast group address that receives data on an interface.

Options

ip-address—Group IP address.

group—Name of group.

Note: You must specify a unique address for each group.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-15