[an error occurred while processing this directive][an error occurred while processing this directive]

family multiservice

Syntax

family multiservice {destination-mac;source-mac;label-1;label-2;payload {ip {layer-3-only;layer-3 {(source-address-only | destination-address-only);}layer-4;}}}

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 8.0.

ip, label-1, label-2, layer-3-only, and payload statements introduced in JUNOS Release 9.4.

layer-3, layer-. source-address-only, and destination-address-only statements introduced in JUNOS Release 9.5.

Description

(M Series, MX Series, and T Series routers only) Configure load balancing based on Layer 2 media access control information. On M120 and M320 routers only, configure VPLS load balancing based on MPLS labels and IP information. On MX Series routers, configure VPLS load balancing.

Options

destination-mac—Include the destination-address MAC information in the hash key.

source-mac—Include the source-address MAC information in the hash key.

label-1 (M120 and M320 routers only)—Include the first MPLS label in the hash key.

label-2 (M120 and M320 routers only)—Include the second MPLS label in the hash key.

payload (MX Series, M120, and M320 routers only)—Include the packets’ IP payload in the hash key

ip (MX Series, M120, and M320 routers only)—Include the IP address of the IPv4 or IPv6 payload in the hash key.

layer-3-only (M120, and M320 routers only)—Include only the Layer 3 information from the packets’ IP payload in the hash key.

layer-3 (MX Series routers only)—Include Layer 3 information from the packets’ IP payload in the hash key.

source-address-only (MX Series routers only)—Include only the source IP address in the payload in the hash key.

destination-address-only (MX Series routers only)—Include only the destination IP address in the payload in the hash key.

Note: You can include either the source-address-only or the destination-address-only statement, not both. They are mutually exclusive.

layer-4 (MX Series routers only)—Include Layer 4 information from the packets’ IP payload in the hash key.

Note: On MX Series routers only, you can configure either Layer 3 or Layer 4 load balancing, or both at the same time.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-15

[an error occurred while processing this directive]