Technical Documentation

community

Syntax

community {target identifier;}

Hierarchy Level

[edit logical-systems logical-system-name protocols bgp family (inet | inet6) unicast topology name],[edit logical-systems logical-system-name protocols bgp group group-name family (inet | inet6) unicast topology name],[edit logical-systems logical-system-name protocols bgp group group-name neighbor address family (inet | inet6) unicast topology name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp family (inet | inet6) unicast topology name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name family (inet | inet6) unicast topology name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name neighbor address family (inet | inet6) unicast topology name],[edit protocols bgp family (inet | inet6) unicast topology name],[edit protocols bgp group group-name family (inet | inet6) unicast topology name],[edit protocols bgp group group-name neighbor address family (inet | inet6) unicast topology name],[edit routing-instances routing-instance-name protocols bgp family (inet | inet6) unicast topology name],[edit routing-instances routing-instance-name protocols bgp group group-name family (inet | inet6) unicast topology name],[edit routing-instances routing-instance-name protocols bgp group group-name neighbor address family (inet | inet6) topology name]

Release Information

Statement introduced in JUNOS Release 9.0.

Description

Configure the community to identify the multitopology routes. BGP uses the target community identifier to install the routes it learns in the appropriate Multitopology Routing tables.

Options

target identifier—Configure the destination to which the route is going.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.


Published: 2010-04-14