[an error occurred while processing this directive][an error occurred while processing this directive]

cbr

Syntax

cbr rate;

Hierarchy Level

[edit interfaces at-fpc/pic/port atm-options vpi vpi-identifier shaping],[edit interfaces at-fpc/pic/port unit logical-unit-number address address family family multipoint-destination address shaping],[edit interfaces at-fpc/pic/port unit logical-unit-number shaping],[edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number address address family family multipoint-destination address shaping],[edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number shaping]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM encapsulation only, define a constant bit rate bandwidth utilization in the traffic-shaping profile.

Default

Unspecified bit rate (UBR); that is, bandwidth utilization is unlimited.

Options

rate—Peak rate, in bits per second (bps) or cells per second (cps). You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), (1,000,000), or g (1,000,000,000). You can also specify a value in cells per second by entering a decimal number followed by the abbreviation c; values expressed in cells per second are converted to bits per second by means of the formula 1 cps = 384 bps.

For ATM1 OC3 interfaces, the maximum available rate is 100 percent of line-rate, or 135,600,000 bps. For ATM1 OC12 interfaces, the maximum available rate is 50 percent of line-rate, or 271,263,396 bps. For ATM2 IQ interfaces, the maximum available rate is 542,526,792 bps.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-20

[an error occurred while processing this directive]