• Downloads
• bert-period    

• Related Topics
• Interface Diagnostics
• Configuring E1 BERT Properties
• Configuring E3 BERT Properties
• Configuring T1 BERT Properties
• Configuring T3 BERT Properties
• bert-algorithm
• bert-error-rate

bert-period

Syntax

Hierarchy Level

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure the duration of a BERT test. Applies to E1, E3, T1, and T3 interfaces, and to E1, E3, T1, and T3 partitions on the channelized interfaces (CE1, CT1, DS3, OC3, OC12, OC48, STM1, STM4, and STM16).

E1 and T1 IQ, IQE, and standard interfaces support an extended BERT period range, up to 86,400 seconds (24 hours).

Note: When configuring CE1 or CT1 interfaces on 10-port Channelized E1/T1 IQE PICs, the bert-period statement must be included at the [edit interfaces ce1-fpc/pic/port] or [edit interfaces ct1-fpc/pic/port] hierarchy level as appropriate.

Options

seconds—Test duration. Range and default values vary by interface type.

Range:

Default:

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.