Technical Documentation



bandwidth (bandwidth | ctnumber bandwidth);

Hierarchy Level

[edit logical-systems logical-system-name protocols l2circuit neighbor address interface interface-name],[edit protocols l2circuit neighbor address interface interface-name]

Release Information

Statement introduced before JUNOS Release 7.4.


Specify bandwidth allocation for a Layer 2 circuit or for the class types of a Layer 2 circuit.


bandwidth—Configure the bandwidth in bits per second for the Layer 2 circuit. You cannot configure the bandwidth for the Layer 2 circuit and for the class types at the same time.

ctnumber bandwidth—Configure the bandwidth in bits per second for a class type on the Layer 2 circuit. You can configure bandwidth for up to four class types (ct0, ct1, ct2, ct3) per Layer 2 circuit. If you configure the class types, you must configure them in order, starting with class type ct0.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Published: 2010-04-27